Check out how to DIY a version of the Lanvin necklaces from the AW10 season

After yesterday, everyone knows that Fashion Indie loves Marc Jacobs, but what else do we love? Hardware jewelry. The DIY expert Chic Steals shows us how to make this runway piece in her own way:

–

WHAT YOU’LL NEED:
- large piece of stiff black felt (8.5″ x 11″)
- black thread
- decorative thread or staples in gold (check the scrapbooking section of the craft store)

- 1 decorative button
- heavy-duty gold snaps (2 sets)
- gold soutache braided trim
- 1 heavy-duty jacket zipper (black with gold teeth)
- gold safety pins (1 large, 15 small)
- clear, flexible plastic (like from a vinyl tabletop cover)

- snap setting pliers/hammer+die for the snaps

- stapler

- needle
- felt or fabric glue

–

1. MAKE THE PARTS Cut the felt into 2 abstract, oblong flower “petals” 2 flower “petals”. To make the triangle-shaped petals, cut the plastic into 2 diamond shapes. Cut the zipper into 3 lengths, each piece measuring 10″ long. Fold each length in the center to make a rounded petal shape; secure the inside with 2 gold staples (or hand-sew stitches in decorative thread).

2. MAKE THE CUFF AND BASE From the felt, cut out the base of your flower parts: a circle measuring approximately 1.25″ in diameter. Then cut a 2″ wide strip that is long enough to go around your wrist plus a 3/4″ for overlap for the snaps. Use snap-setting pliers (like Dritz), or hammer and die to set 2 snaps (and their counterparts) into the ends. Because they are strong, we chose shanked snaps; alternatively, you could use sew-on snaps.

3. ADD THE EMBELLISHMENT Using a needle and thread, hand-sew your parts onto the felt base. Start with a felt petal, then a zipper petal, then a plastic petal in a corkscrew design; repeat, attaching each new petal on top of the previous one. Wind the braided trim in and out of the petals in a figure-8 pattern, securing in the center with a few stitches. Then hide all of your stitching with a button sewn into the center. Pin safety pins haphazardly around the edge of one of the felt petals; thread 10 smaller pins onto the larger pin and attach. Complete the look by adding yet more staples or decorative thread.

4. ATTACH BASE TO CUFF Glue felt base to the center of the cuff. Secure further by sewing around edge of the circle base with decorative thread.

To let the cuff rock out on its own, wear with something demure…or do a full-on Marc Jacobs style, with a nipped-in shrunken jacket, mismatched obi belt, super-long denim pencil skirt, and teeny porkpie straw hat set akilter.

Still have questions? Email me at CarlyJCais AT FashionTribes.com. Otherwise, happy DIY-ing!

–

I’m so excited to try this DIY, I’ll let you know how it goes! 

SOURCE: Chic Steals